Parkovaya St 1
Aprelevka 143363
Moscow, Russia

Phone Numbers
+7 (495) 778 48 98
+7 (967) 230 16 64


Term of production of the
conveyor from 3 to 7 days

Helical, spiral
Conveyor, conveyor screw
Without stem, reversible
Focusing look at a point which is outside the picture, gently pull the head back and ... You will see the conveyor throws at you the product particles.
Our company has a desire to convince you that our advantage is not only years of experience, but also the very desire to twirl swirl around the production and together with you ..... forever.
Machines for continuous mechanical transport
the conveyor in addition to moving object, the run any additional processing steps, such a conveyor belt called.
Of the machine continuous mechanical transport
The machine consists of an engine as a source of energy (motion), and the gear actuators and control systems. Together, the first three parts are usually referred to as the engine unit. The mechanical transmission device called a transmission mechanism and the mechanical actuator - the actuator.
The transport unit
The conveyor consists of a drive unit ( gear and motor ) , rotating screw ( bessterzhnevuyu spiral or screw - working body machine ) , a drive shaft with reinforced on it turns the screw conveyor , pipeline or channel with a semi-cylindrical bottom, loading and unloading device. Through the hopper loading device is supplied bulk cargo and slides along the pipeline by rotating the screw. Joint rotation of the screw prevents the load from the force of gravity and friction of its pipeline. Through a window in the pipeline is unloading device. Screw conveyor unit performed a single-pass , to the right or left direction of the spiral. The surface of the rotor blade is , fancy , ribbon , solid ( used when moving the bulk powder , fine dry cargo , not prone to caking ) . When you move the cargo caking used screws to screw blade , contoured , tape surface. As the screw in bessterzhnevom spiral conveying unit uses steel spiral with outer diameters up to 100 mm - flexible spring steel . For trasportiruyuschih units with a capacity of more than 20 m / cu . per hour applied rigid helix with an outer diameter of 60 mm to 420 mm .

Copyright © Factory "Units", 2004 - 2019 All rights reserved.
+7 (967) 230 16 64
счетчик посещений
Transporting machines called continuous machines that move the bulk or piece goods continuous stream. From other modes of transport they differ spatially fixed trajectory of the load. These machines are used for the transportation of goods over short distances within the plant, the plant and call them conveyor. If the conveyor  moves the load in a vertical plane, it is called an elevator. If